e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.
All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus.
- Engagement:6 Degree
- Freehub Mount: XD Drive
- Hub: e*spec rear hub, specially designed for eBike use.
- Axle: Steel axle w/pinch bolt
- Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps
- Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers
- Axle: 148 x 12mm
- Drilling: 28h
- Material: Aluminium 6069
- Width: 35mm internal width
Occasionally, without notice, manufacturers change product design and/or specifications.
There are no reviews yet.